Uhlahlelo lweNkqubo yokuCima kweZixhobo zokuCima zokuFundisa nge-Induction

Xa ubunzulu bomaleko owenziwe lukhuni ukuba ukuphindaphinda kwezixhobo ezikhoyo bunokufikelela kubunzulu kakhulu ukuhlangabezana neemfuno zokusetyenzwa, ubunzulu obukhulu bomaleko obunzima bunokufunyanwa ngezi ndlela zilandelayo:

(1) Ngexesha lokufudumeza okuqhubekayo kunye nokucima, nciphisa isantya esihambayo se-inductor kunye ne-workpiece okanye ukwandisa i-gap phakathi kwe-inductor kunye ne-workpiece.

(2) Xa ukufudumala kunye nokucima ngexesha elifanayo, ukunciphisa amandla okukhutshwa kwesixhobo okanye ukusebenzisa ukufudumeza okuphakathi. Amandla emveliso yesixhobo anokulungiswa ngokunciphisa okanye ukwandisa iVm. Ukufudumeza okungaphakathi kuyalingana nokufudumala kwangaphambili; ngexesha lenkqubo yokufudumeza okwethutyana, iqondo lobushushu le-workpiece linyuka ngokwenyathelo ukuya kwinkqubo ekhankanyiweyo yobushushu. Kungakhathaliseki ukuba yeyiphi indlela esetyenziselwa ukufudumeza i-workpiece, injongo kukufumana ubunzulu obukhulu bomgangatho wokufudumeza ngokwandisa ixesha lokufudumeza kunye nokuxhomekeka ekuqhubeni ubushushu bomhlaba ukuya kwiziko, kunye nokufumana ubunzulu obukhulu bokuqina. umaleko emva kokucima kunye nokupholisa.

Xa kukho iindawo ezininzi ze-workpiece efanayo ezifuna ukucinywa kwaye ziqiniswe, kufuneka zitshiswe ngendlela ethile ukuze zithintele ukufudumala okanye ukuqhekeka kwamacandelo acinywe kwaye aqiniswe.

Umzekelo: (1) I-shaft ene-steped kufuneka kuqala icime indawo encinci ye-diameter, ize emva koko icime indawo enkulu.

(2) I-shaft ye-gear kufuneka iqale ukucima indawo yegiya kwaye emva koko ucime indawo ye-shaft.

(3) Iigiya ezidityanisiweyo ezininzi kufuneka ziqale zicime iigiya ezinobubanzi obuncinci, emva koko zicime iigiya ezinobubanzi obukhulu.

(4) Iigiya zangaphakathi nezingaphandle zifanele ziqale zicime amazinyo angaphakathi zize ziwacime amazinyo angaphandle.