Peć za topljenje aluminija s tamponom od 300 kg

Peć za topljenje aluminija s tamponom je vrsta opreme za topljenje metala koju je razvila naša kompanija i pogodna je za ispod 950 ℃. Njegove funkcije imaju sljedeće karakteristike:

1. Ušteda energije i ušteda novca: prosječna potrošnja električne energije aluminija iznosi 0.4-0.5 kWh/kg aluminija, što je više od 30% manje od tradicionalnih peći;

2. Efikasno korištenje: 600 ° porast temperature za 1 sat, super velika brzina zagrijavanja, dugotrajna konstantna temperatura;

3. Zaštita okoliša i niske emisije ugljika: u skladu s nacionalnom politikom uštede energije i smanjenja emisije, bez prašine, bez naftnih isparenja i bez emisije štetnih plinova;

4. Sigurnost i stabilnost: Nezavisno istraživanje i razvoj 32-bitne CPU tehnologije, sa inteligentnom zaštitom kao što je curenje, curenje aluminijuma, prelivanje i nestanak struje;

5. Manje aluminijske troske: indukcijsko zagrijavanje s vrtložnim valovima, međufazni val, bez mrtvog kuta zagrijavanja, visoka iskorištenost sirovina;

6. Produženje vijeka trajanja: lončić se zagrijava ravnomjerno, razlika u temperaturi je mala, a životni vijek je u prosjeku produžen za 50%;

7. Temperature control: the eddy current reacts instantly, the crucible heats up by itself, without the hysteresis of traditional heating;

1. Primjenjive industrije:

Pogon za lijevanje aluminija, pogon za proizvodnju aluminijskih ingota, industrija topljenja aluminija, tvornica za lijevanje, proizvodnja pribora za automobile i motocikle, školjka za mobilne telefone, lampe, proizvođač grijaćih ploča za kuhanje riže

2. Uvod proizvoda:

Buffer wave aluminum melting furnace is an energy-saving buffer wave aluminum melting equipment that replaces traditional resistance, coal-fired, oil-fired, and intermediate frequency furnaces. With the increase in cost of materials, various industries are facing fierce market competition. The metallurgical industry has worsened the situation. The emergence of the buffer wave aluminum melting furnace has solved various problems in the metallurgical industry. It has the advantages of intelligence, safety, money saving, environmental protection and other national support, and is sought after by the metallurgical industry.

3. 300 kg buffer wave aluminum melting furnace

Model: SD-AI-300KG

Materijal za topljenje: grafitni lonac od silicijum karbida

Materijal lončića: legura aluminija

Kapacitet lonca: 300 kg

Snaga: 60KW

Melting power consumption/ton: 380 kWh/ton

Potrošnja energije za očuvanje topline: 3 kWh/sat

Brzina topljenja kg/sat: 160KG/sat

Buffer wave aluminum melting furnace product specification selection:

4. Princip grijanja:

The buffer wave aluminum melting furnace uses a buffer wave induction heating controller to convert electrical energy into heat energy using the principle of buffer wave induction heating. First, the internal rectifier filter circuit converts the alternating current into direct current, and then the control circuit converts the direct current into high-frequency magnetic energy. The high-speed changing current passing through the coil will produce a high-speed changing magnetic field. When the magnetic field lines in the magnetic field pass through the crucible, numerous small eddy currents will be generated inside the crucible, so that the crucible itself will generate heat at high speed, transfer the heat to the aluminum alloy, and melt into a liquid state. .

Measures to reduce aluminum slag in buffer wave aluminum melting furnace:

In the process of aluminum alloy smelting, as the amount of slag increases, the melting loss of aluminum also increases, and the amount of slag is related to the melting temperature, the state of the charge, and the production process. If you want to reduce aluminum slag, you must start from the following aspects:

(1) Reasonable furnace geometric dimensions and feeding order;

(2) Strictly control the melting temperature to prevent overheating. The flame spray should have a certain angle to facilitate rapid melting and shorten the melting time;

(3) Suitable melting amount and refining time, stirring should be stable, without destroying the oxide film on the surface of the melt, and covering the aluminum melt in a timely manner;

(4) Sort and clean the waste aluminum, and pack the finely divided charge with a large contrast surface area with a press;

(5) Treatment of slag before slagging;