I-300kg ye-aluminium yokunyibilikisa iziko

Buffer wave aluminum melting furnace is a kind of metal melting equipment developed by our company that is suitable for below 950℃. Its functions have the following characteristics:

1. Ukonga umbane kunye nokonga imali: umyinge wokusetyenziswa kombane kwialuminium yi-0.4-0.5 kWh / KG aluminium, engaphezulu kwama-30% ngaphantsi kwezitovu zesintu;

Ukusetyenziswa ngokufanelekileyo: 2 ° ukunyuka kweqondo lokushisa kwiyure eli-600, isantya sokufudumeza ngokukhawuleza, ubushushu obuhlala buhleli;

3. Ukukhuselwa kwendalo kunye nekhabhoni ephantsi: ngokuhambelana nemigaqo yesizwe yokonga umbane kunye nemigaqo-nkqubo yokunciphisa ukukhutshwa, akukho uthuli, akukho fume yeoyile, kwaye akukho gesi ziyingozi;

4. Ukhuseleko nozinzo: Uphando oluzimeleyo kunye nophuhliso lwetekhnoloji ye-CPU engama-32-bit, ngokhuseleko olukrelekrele njengokuvuza, ukuvuza kwealuminium, ukuphuphuma, kunye nokusilela kwamandla;

5. Ngaphantsi kwe-aluminium slag: i-buffer ye-eddy eddy yangoku yokufudumeza ubushushu, akukho kufudumeza i-engile efileyo, inqanaba lokusetyenziswa kwezixhobo eziphakamileyo;

6.Ukongezwa kobomi: i-crucible ishushu ngokulinganayo, umahluko wobushushu mncinci, kwaye ixesha lokuphila liyandiswa ngama-50% ngokomndilili;

7. Temperature control: the eddy current reacts instantly, the crucible heats up by itself, without the hysteresis of traditional heating;

1.imizi-mveliso esebenzayo:

I-aluminium yokuphosa isityalo, isityalo se-aluminium ingot mveliso, inkunkuma ye-aluminium yokunyibilikisa, imveliso yokuphosa, imveliso yemoto kunye nezithuthuthu, iqokobhe lefowuni ephathekayo, isibane, irayisi yombane

2. Intshayelelo Product:

Buffer wave aluminum melting furnace is an energy-saving buffer wave aluminum melting equipment that replaces traditional resistance, coal-fired, oil-fired, and intermediate frequency furnaces. With the increase in cost of materials, various industries are facing fierce market competition. The metallurgical industry has worsened the situation. The emergence of the buffer wave aluminum melting furnace has solved various problems in the metallurgical industry. It has the advantages of intelligence, safety, money saving, environmental protection and other national support, and is sought after by the metallurgical industry.

3. 300 kg buffer wave aluminum melting furnace

Umzekelo: SD-AI-300KG

Izinto zokunyibilikisa: i-silicon carbide graphite crucible

Izinto ezinokukhutshwa: i-aluminium alloy

Umthamo wentambo: 300KG

Amandla alinganisiweyo: 60KW

Melting power consumption/ton: 380 kWh/ton

Ukusetyenziswa kwamandla okulondolozwa kobushushu / iyure: 3 kWh / iyure

Ukunyibilika kwesantya kg / ngeyure: 160KG / ngeyure

Buffer wave aluminum melting furnace product specification selection:

Umgaqo wokufudumeza:

The buffer wave aluminum melting furnace uses a buffer wave induction heating controller to convert electrical energy into heat energy using the principle of buffer wave induction heating. First, the internal rectifier filter circuit converts the alternating current into direct current, and then the control circuit converts the direct current into high-frequency magnetic energy. The high-speed changing current passing through the coil will produce a high-speed changing magnetic field. When the magnetic field lines in the magnetic field pass through the crucible, numerous small eddy currents will be generated inside the crucible, so that the crucible itself will generate heat at high speed, transfer the heat to the aluminum alloy, and melt into a liquid state. .

Measures to reduce aluminum slag in buffer wave aluminum melting furnace:

In the process of aluminum alloy smelting, as the amount of slag increases, the melting loss of aluminum also increases, and the amount of slag is related to the melting temperature, the state of the charge, and the production process. If you want to reduce aluminum slag, you must start from the following aspects:

(1) Reasonable furnace geometric dimensions and feeding order;

(2) Strictly control the melting temperature to prevent overheating. The flame spray should have a certain angle to facilitate rapid melting and shorten the melting time;

(3) Suitable melting amount and refining time, stirring should be stable, without destroying the oxide film on the surface of the melt, and covering the aluminum melt in a timely manner;

(4) Sort and clean the waste aluminum, and pack the finely divided charge with a large contrast surface area with a press;

(5) Treatment of slag before slagging;