I-300kg buffer wave aluminium encibilikisa isithando somlilo

Buffer wave aluminum melting furnace is a kind of metal melting equipment developed by our company that is suitable for below 950℃. Its functions have the following characteristics:

1. Ukonga amandla nokonga imali: isilinganiso sokusetshenziswa kagesi kwe-aluminium ngu-0.4-0.5 kWh / KG aluminium, okungaphansi kuka-30% kunezitofu zendabuko;

Ukusetshenziswa ngokuyikho: 2 ° ukukhuphuka kwamazinga okushisa ngehora eli-600, isivinini sokushisa esisheshayo esisheshayo, izinga lokushisa elihlala njalo;

3. Ukuvikelwa kwemvelo nekhabhoni ephansi: ngokuhambisana nezinqubomgomo zikazwelonke zokonga ugesi kanye nokunciphisa ukungcola, akukho uthuli, akukho fume kawoyela, futhi akukho ukukhishwa kwegesi okuyingozi;

4. Ukuphepha nokuzinza: Ucwaningo oluzimele nokuthuthukiswa kobuchwepheshe be-CPU engama-32-bit, ngokuvikelwa okuhlakaniphile njengokuvuza, ukuvuza kwe-aluminium, ukuchichima, nokwehluleka kwamandla;

5. I-slag encane ye-aluminium: Ukushisa kwe-buffer wave eddy yamanje, akukho Ukushisa okushisayo, isilinganiso sokusetshenziswa kwempahla eluhlaza eluhlaza;

6.Isandiso sempilo: i-crucible ishiswa ngokulinganayo, umehluko wezinga lokushisa mncane, futhi isikhathi sokuphila sinwetshiwe ngama-50% ngokwesilinganiso;

7. Temperature control: the eddy current reacts instantly, the crucible heats up by itself, without the hysteresis of traditional heating;

1.Izimboni ezisebenzayo:

Isitshalo se-Aluminium die-casting, isitshalo sokukhiqiza i-aluminium ingot, imboni yokuncibilika kwe-aluminium, isitshalo sokukhipha, ukukhiqizwa kwezimoto nezithuthuthu, igobolondo leselula, isibani, irayisi kagesi

2. Ukwethulwa Komkhiqizo:

Buffer wave aluminum melting furnace is an energy-saving buffer wave aluminum melting equipment that replaces traditional resistance, coal-fired, oil-fired, and intermediate frequency furnaces. With the increase in cost of materials, various industries are facing fierce market competition. The metallurgical industry has worsened the situation. The emergence of the buffer wave aluminum melting furnace has solved various problems in the metallurgical industry. It has the advantages of intelligence, safety, money saving, environmental protection and other national support, and is sought after by the metallurgical industry.

3. 300 kg buffer wave aluminum melting furnace

Imodeli: SD-AI-300KG

Izinto zokuncibilika: i-silicon carbide graphite crucible

Impahla ye-Crucible: i-aluminium alloy

Umthamo we-Crucible: 300KG

amandla Kukalwe: 60KW

Melting power consumption/ton: 380 kWh/ton

Ukusetshenziswa kwamandla okulondolozwa kokushisa / ihora: 3 kWh / ihora

Ijubane lokuncibilika kg / ihora: 160KG / ihora

Buffer wave aluminum melting furnace product specification selection:

Isimiso sokushisa:

The buffer wave aluminum melting furnace uses a buffer wave induction heating controller to convert electrical energy into heat energy using the principle of buffer wave induction heating. First, the internal rectifier filter circuit converts the alternating current into direct current, and then the control circuit converts the direct current into high-frequency magnetic energy. The high-speed changing current passing through the coil will produce a high-speed changing magnetic field. When the magnetic field lines in the magnetic field pass through the crucible, numerous small eddy currents will be generated inside the crucible, so that the crucible itself will generate heat at high speed, transfer the heat to the aluminum alloy, and melt into a liquid state. .

Measures to reduce aluminum slag in buffer wave aluminum melting furnace:

In the process of aluminum alloy smelting, as the amount of slag increases, the melting loss of aluminum also increases, and the amount of slag is related to the melting temperature, the state of the charge, and the production process. If you want to reduce aluminum slag, you must start from the following aspects:

(1) Reasonable furnace geometric dimensions and feeding order;

(2) Strictly control the melting temperature to prevent overheating. The flame spray should have a certain angle to facilitate rapid melting and shorten the melting time;

(3) Suitable melting amount and refining time, stirring should be stable, without destroying the oxide film on the surface of the melt, and covering the aluminum melt in a timely manner;

(4) Sort and clean the waste aluminum, and pack the finely divided charge with a large contrast surface area with a press;

(5) Treatment of slag before slagging;