site logo

300кг буферии бухори алюминий

300кг буферии бухори алюминий

Buffer wave aluminum melting furnace is a kind of metal melting equipment developed by our company that is suitable for below 950℃. Its functions have the following characteristics:

1. Сарфаи энергия ва сарфаи пул: истеъмоли миёнаи қувваи барқ ​​аз алюминий 0.4-0.5 кВт/кг алюминий аст, ки нисбат ба печҳои анъанавӣ зиёда аз 30% камтар аст;

2. Истифодаи самаранок: ҳарорати баландшавии 600 ° дар як соат, суръати гармидиҳии хеле зуд, ҳарорати доимии дарозмуддат;

3. Ҳифзи муҳити зист ва карбон кам: мутобиқи сиёсати миллии сарфакорӣ ва кам кардани партовҳо, на чанг, на дуди нафт ва на партовҳои гази зараровар;

4. Бехатарӣ ва субот: Таҳқиқот ва рушди мустақили технологияи 32-битаи CPU, бо муҳофизати оқилона ба монанди ихроҷ, ихроҷи алюминий, аз ҳад зиёд ва нокомии барқ;

5. Шлакҳои алюминии камтар: буферии мавҷи гармидиҳии индуксионии ҷараён, кунҷи гармидиҳии гармидиҳӣ, сатҳи истифодаи ашёи хом;

6. Давомнокии умр: тигель баробар гарм карда мешавад, фарқияти ҳарорат кам аст ва умри умр ба ҳисоби миёна 50% дароз карда мешавад;

7. Temperature control: the eddy current reacts instantly, the crucible heats up by itself, without the hysteresis of traditional heating;

1. Саноатҳои татбиқшаванда:

Заводи қолаби алюминий, корхонаи истеҳсоли кӯзаи алюминий, саноати гудохтани алюминий, корхонаи рехтагарӣ, истеҳсоли лавозимоти автомобилӣ ва мотосикл, пӯсти телефони мобилӣ, лампа, истеҳсолкунандаи табақи гармидиҳии биринҷ

2. Муаррифии маҳсулот:

Buffer wave aluminum melting furnace is an energy-saving buffer wave aluminum melting equipment that replaces traditional resistance, coal-fired, oil-fired, and intermediate frequency furnaces. With the increase in cost of materials, various industries are facing fierce market competition. The metallurgical industry has worsened the situation. The emergence of the buffer wave aluminum melting furnace has solved various problems in the metallurgical industry. It has the advantages of intelligence, safety, money saving, environmental protection and other national support, and is sought after by the metallurgical industry.

3. 300 kg buffer wave aluminum melting furnace

Модел: SD-AI-300KG

Маводи гудозанда: графити карбиди кремний

Маводи каҷ: хӯлаи алюминий

Иқтидори қобили қабул: 300KG

Қувваи барқ: 60KW

Melting power consumption/ton: 380 kWh/ton

Истеъмоли қувваи нигоҳдории гармӣ/соат: 3 кВт/соат/соат

Суръати обшавӣ кг/соат: 160КГ/соат

Buffer wave aluminum melting furnace product specification selection:

Рақами маҳсулот ҳокимият имконият Иқтидори муайяншуда ҳарорати амалиётӣ Вақти гармидиҳии кӯраи холӣ 坩埚 type
SD-RL-100 30KW 100KG 40KG / H 950 <1.5H Шакли даври
SD-RL-200 40KW 200KG 100KG / H <1.5H
SD-RL-300 60KW 300KG 180KG / H <2.0H
SD-RL-400 80KW 400KG 240KG / H <2.0H
SD-RL-500 100KW 500KG 300KG / H <2.5H
SD-RL-600 120KW 600KG 350KG / H <2.5H
SD-RL-800 150KW 800KG 420KG / H <2.5H
Remarks: Various furnaces can be customized according to different occasions and technical requirements of customers.

4. Принсипи гармидиҳӣ:

The buffer wave aluminum melting furnace uses a buffer wave induction heating controller to convert electrical energy into heat energy using the principle of buffer wave induction heating. First, the internal rectifier filter circuit converts the alternating current into direct current, and then the control circuit converts the direct current into high-frequency magnetic energy. The high-speed changing current passing through the coil will produce a high-speed changing magnetic field. When the magnetic field lines in the magnetic field pass through the crucible, numerous small eddy currents will be generated inside the crucible, so that the crucible itself will generate heat at high speed, transfer the heat to the aluminum alloy, and melt into a liquid state. .

Measures to reduce aluminum slag in buffer wave aluminum melting furnace:

In the process of aluminum alloy smelting, as the amount of slag increases, the melting loss of aluminum also increases, and the amount of slag is related to the melting temperature, the state of the charge, and the production process. If you want to reduce aluminum slag, you must start from the following aspects:

(1) Reasonable furnace geometric dimensions and feeding order;

(2) Strictly control the melting temperature to prevent overheating. The flame spray should have a certain angle to facilitate rapid melting and shorten the melting time;

(3) Suitable melting amount and refining time, stirring should be stable, without destroying the oxide film on the surface of the melt, and covering the aluminum melt in a timely manner;

(4) Sort and clean the waste aluminum, and pack the finely divided charge with a large contrast surface area with a press;

(5) Treatment of slag before slagging;