300kg buffer ife aluminom agbaze oku

Buffer wave aluminum melting furnace is a kind of metal melting equipment developed by our company that is suitable for below 950℃. Its functions have the following characteristics:

1. Ịchekwa ume na ịchekwa ego: nkezi ọkụ eletrik nke aluminom bụ 0.4-0.5 kWh/KG aluminom, nke karịrị 30% na-erughị ọkụ ọdịnala;

2. Itinye n’ọrụ nke ọma: 600 Celsius na-ebili okpomọkụ na elekere 1, oke ọkụ ọkụ ngwa ngwa, ọnọdụ okpomọkụ na-adịte aka;

3. Nchedo gburugburu ebe obibi na carbon dị ala: n’ikwekọ n’iwu nchekwa nzọpụta na mbelata anwụrụ ọkụ mba, enweghị uzuzu, enweghị mmanụ anwụrụ, na enweghị anwụrụ ọkụ gas na -emerụ ahụ;

4. Nchedo na nkwụsi ike: Nchọpụta nọọrọ onwe ya na mmepe teknụzụ 32-bit CPU, yana nchedo nwere ọgụgụ isi dị ka mwepu, nchapu aluminom, njupụta, na ọdịda ike;

5. Obere slag aluminium: buffer wave eddy ugbu a induction kpo oku, enweghị akụkụ nwụrụ anwụ kpo oku, ọnụego iji akụrụngwa dị elu;

6. Mgbakwunye ndụ: a na -eme ka ite ọkụ dị ọkụ, nha okpomọkụ dị ntakịrị, a na -agbatị afọ ndụ site na 50% na nkezi;

7. Temperature control: the eddy current reacts instantly, the crucible heats up by itself, without the hysteresis of traditional heating;

1. Ụlọ ọrụ ndị metụtara ya:

Aluminom anwụ-nkedo osisi, aluminom ingot mmepụta osisi, n’efu aluminom agbaze ụlọ ọrụ, nkedo osisi, ụgbọala na ọgba tum tum ngwa mmepụta, ekwentị mkpanaka, oriọna, eletriki osi ite esi nri kpo oku efere emeputa

2. Product iwebata:

Buffer wave aluminum melting furnace is an energy-saving buffer wave aluminum melting equipment that replaces traditional resistance, coal-fired, oil-fired, and intermediate frequency furnaces. With the increase in cost of materials, various industries are facing fierce market competition. The metallurgical industry has worsened the situation. The emergence of the buffer wave aluminum melting furnace has solved various problems in the metallurgical industry. It has the advantages of intelligence, safety, money saving, environmental protection and other national support, and is sought after by the metallurgical industry.

3. 300 kg buffer wave aluminum melting furnace

Nlereanya: SD-AI-300KG

Ihe na -agbaze: silicon carbide graphite crucible

Ihe eji eme ihe: aluminom alloy

Ike ngụkọta: 300KG

Ike akara: 60KW

Melting power consumption/ton: 380 kWh/ton

Ike ichekwa ọkụ/elekere: 3 kWh/awa

Ọgba na -agbaze kg/awa: 160KG/awa

Buffer wave aluminum melting furnace product specification selection:

4. ụkpụrụ kpo oku:

The buffer wave aluminum melting furnace uses a buffer wave induction heating controller to convert electrical energy into heat energy using the principle of buffer wave induction heating. First, the internal rectifier filter circuit converts the alternating current into direct current, and then the control circuit converts the direct current into high-frequency magnetic energy. The high-speed changing current passing through the coil will produce a high-speed changing magnetic field. When the magnetic field lines in the magnetic field pass through the crucible, numerous small eddy currents will be generated inside the crucible, so that the crucible itself will generate heat at high speed, transfer the heat to the aluminum alloy, and melt into a liquid state. .

Measures to reduce aluminum slag in buffer wave aluminum melting furnace:

In the process of aluminum alloy smelting, as the amount of slag increases, the melting loss of aluminum also increases, and the amount of slag is related to the melting temperature, the state of the charge, and the production process. If you want to reduce aluminum slag, you must start from the following aspects:

(1) Reasonable furnace geometric dimensions and feeding order;

(2) Strictly control the melting temperature to prevent overheating. The flame spray should have a certain angle to facilitate rapid melting and shorten the melting time;

(3) Suitable melting amount and refining time, stirring should be stable, without destroying the oxide film on the surface of the melt, and covering the aluminum melt in a timely manner;

(4) Sort and clean the waste aluminum, and pack the finely divided charge with a large contrast surface area with a press;

(5) Treatment of slag before slagging;