300kg buffer raƙuman ruwa mai narkar da aluminium

Buffer wave aluminum melting makera shine nau’in kayan aikin narkewar ƙarfe wanda kamfaninmu ya haɓaka wanda ya dace da ƙasa da 950 ℃. Ayyukansa suna da halaye masu zuwa:

1. Adana kuzari da tanadin kuɗi: matsakaicin ƙarfin wutar lantarki na aluminium shine 0.4-0.5 kWh/KG aluminum, wanda ya fi 30% ƙasa da murhun gargajiya;

2. Ingantaccen amfani: 600 ° zazzabi mai zafi a cikin awa 1, saurin dumama da sauri, zazzabi mai ɗorewa na dindindin;

3. Kariya ta muhalli da ƙaramin carbon: daidai da manufofin ceton makamashi na ƙasa da manufofin rage hayaƙi, babu ƙura, babu hayaƙin mai, kuma babu gurɓataccen iskar gas;

4. Aminci da kwanciyar hankali: Bincike mai zaman kansa da haɓaka fasahar 32-bit CPU, tare da kariya ta hankali kamar ɓarna, ɓarkewar aluminium, ambaliya, da gazawar wuta;

5. Kadan slag na aluminium: buffer wave eddy current induction dumama, babu kushin mutuƙar zafi, ƙimar amfani da albarkatun ƙasa;

6. Tsawaita rayuwa: ana ƙona gurnani daidai gwargwado, bambancin zafin jiki ƙarami ne, kuma ana ƙara tsawon rai da kashi 50% a matsakaici;

7. Temperature control: the eddy current reacts instantly, the crucible heats up by itself, without the hysteresis of traditional heating;

1. Masana’antu masu dacewa:

Ginin mutu-siminti na aluminium, injin samar da ingataccen aluminium, masana’antar narkar da aluminium, masana’antar simintin gyare-gyare, kera motoci da babura, ƙirar wayar hannu, fitila, mai dafa shinkafa mai ƙona wutar lantarki

2. Gabatarwar samfurin:

Buffer wave aluminum melting furnace is an energy-saving buffer wave aluminum melting equipment that replaces traditional resistance, coal-fired, oil-fired, and intermediate frequency furnaces. With the increase in cost of materials, various industries are facing fierce market competition. The metallurgical industry has worsened the situation. The emergence of the buffer wave aluminum melting furnace has solved various problems in the metallurgical industry. It has the advantages of intelligence, safety, money saving, environmental protection and other national support, and is sought after by the metallurgical industry.

3. 300 kg buffer wave aluminum melting furnace

Model: SD-AI-300KG

Abu mai narkewa: silicon carbide graphite Crucible

Abun da ke ciki: Alloy aluminum

Ƙarfin iya aiki: 300KG

Rated ikon: 60KW

Melting power consumption/ton: 380 kWh/ton

Yawan amfani da wutar lantarki/awa: 3 kWh/awa

Saurin narkewa kg/awa: 160KG/awa

Buffer wave aluminum melting furnace product specification selection:

4. Ka’idar dumama:

The buffer wave aluminum melting furnace uses a buffer wave induction heating controller to convert electrical energy into heat energy using the principle of buffer wave induction heating. First, the internal rectifier filter circuit converts the alternating current into direct current, and then the control circuit converts the direct current into high-frequency magnetic energy. The high-speed changing current passing through the coil will produce a high-speed changing magnetic field. When the magnetic field lines in the magnetic field pass through the crucible, numerous small eddy currents will be generated inside the crucible, so that the crucible itself will generate heat at high speed, transfer the heat to the aluminum alloy, and melt into a liquid state. .

Measures to reduce aluminum slag in buffer wave aluminum melting furnace:

In the process of aluminum alloy smelting, as the amount of slag increases, the melting loss of aluminum also increases, and the amount of slag is related to the melting temperature, the state of the charge, and the production process. If you want to reduce aluminum slag, you must start from the following aspects:

(1) Reasonable furnace geometric dimensions and feeding order;

(2) Strictly control the melting temperature to prevent overheating. The flame spray should have a certain angle to facilitate rapid melting and shorten the melting time;

(3) Suitable melting amount and refining time, stirring should be stable, without destroying the oxide film on the surface of the melt, and covering the aluminum melt in a timely manner;

(4) Sort and clean the waste aluminum, and pack the finely divided charge with a large contrast surface area with a press;

(5) Treatment of slag before slagging;