300kg buffer wave aluminium e qhibilihisang sebōpi

Buffer wave aluminum melting furnace is a kind of metal melting equipment developed by our company that is suitable for below 950℃. Its functions have the following characteristics:

1. Ho boloka matla le ho boloka chelete: karolelano tšebeliso ea motlakase ea aluminium ke 0.4-0.5 kWh / KG aluminium, e leng tlase ho 30% ho feta litofo tsa setso;

2. Ts’ebeliso e sebetsang: 600 ° mocheso o nyolohang ka hora e le 1, lebelo le futhumatsang ka potlako, mocheso o tšoarellang nako e telele;

3. Ts’ireletso ea tikoloho le khabone e tlase: tumellanong le melaoana ea naha ea ho boloka matla le phokotso ea mohlapo, ha ho lerōle, ha ho na mosi oa oli ebile ha ho na mesi e kotsi ea khase;

4. Polokeho le botsitso: Patlisiso e ikemetseng le nts’etsopele ea mahlale a CPU a 32-bit, ka tšireletso e bohlale joalo ka ho dutla, ho dutla ha aluminium, ho khaphatseha le ho hloleha ha motlakase;

5. Phokotso e nyane ea aluminium: buffer wave eddy ea hona joale e futhumatsang, ha ho na futhumatsang angle angle, sekhahla se phahameng sa ts’ebeliso ea lisebelisoa tse tala;

Keketso ea bophelo

7. Temperature control: the eddy current reacts instantly, the crucible heats up by itself, without the hysteresis of traditional heating;

1. Liindasteri tse sebetsang:

Semela sa ho lahla aluminium, semela sa tlhahiso ea aluminium ingot, indasteri ea litšila e qhibilihisang aluminium, semela sa ho lahla, tlhahiso ea lisebelisoa tsa likoloi le tsa lithuthuthu, khetla ea mohala oa mohala, lebone, moetsi oa raese oa motlakase o phehang poleiti

2. Selelekela sa sehlahisoa:

Buffer wave aluminum melting furnace is an energy-saving buffer wave aluminum melting equipment that replaces traditional resistance, coal-fired, oil-fired, and intermediate frequency furnaces. With the increase in cost of materials, various industries are facing fierce market competition. The metallurgical industry has worsened the situation. The emergence of the buffer wave aluminum melting furnace has solved various problems in the metallurgical industry. It has the advantages of intelligence, safety, money saving, environmental protection and other national support, and is sought after by the metallurgical industry.

3. 300 kg buffer wave aluminum melting furnace

Mohlala: SD-AI-300KG

Lisebelisoa tse qhibilihisang: silicon carbide graphite tsoana le sebopi

Crucible lintho tse bonahalang: aluminium motsoako

Tsoana le sebopi bokgoni: 300KG

E lekantsoe matla: 60KW

Melting power consumption/ton: 380 kWh/ton

Tšebeliso ea matla a mocheso / hora: 3 kWh / hora

Lebelo le qhibilihang lebelo kg / hora: 160KG / hora

Buffer wave aluminum melting furnace product specification selection:

4.Molao-motheo oa ho futhumatsa:

The buffer wave aluminum melting furnace uses a buffer wave induction heating controller to convert electrical energy into heat energy using the principle of buffer wave induction heating. First, the internal rectifier filter circuit converts the alternating current into direct current, and then the control circuit converts the direct current into high-frequency magnetic energy. The high-speed changing current passing through the coil will produce a high-speed changing magnetic field. When the magnetic field lines in the magnetic field pass through the crucible, numerous small eddy currents will be generated inside the crucible, so that the crucible itself will generate heat at high speed, transfer the heat to the aluminum alloy, and melt into a liquid state. .

Measures to reduce aluminum slag in buffer wave aluminum melting furnace:

In the process of aluminum alloy smelting, as the amount of slag increases, the melting loss of aluminum also increases, and the amount of slag is related to the melting temperature, the state of the charge, and the production process. If you want to reduce aluminum slag, you must start from the following aspects:

(1) Reasonable furnace geometric dimensions and feeding order;

(2) Strictly control the melting temperature to prevent overheating. The flame spray should have a certain angle to facilitate rapid melting and shorten the melting time;

(3) Suitable melting amount and refining time, stirring should be stable, without destroying the oxide film on the surface of the melt, and covering the aluminum melt in a timely manner;

(4) Sort and clean the waste aluminum, and pack the finely divided charge with a large contrast surface area with a press;

(5) Treatment of slag before slagging;