Imigaqo yokusebenza ye izixhobo zokucima rhoqo

1. Abaqhubi bezixhobo zokucima i-high-frequency quenching kufuneka baqeqeshwe kwaye baqeqeshwe ngaphambi kokuba basebenze.

2. Xa isixhobo somatshini siqaliswa, vula kuqala inkqubo yokubonelela ngamanzi, emva koko uvule umbane wesixhobo somatshini, uvule i-voltage ye-filament yokuqala kunye neyesibini i-filament, uvule i-voltage ephezulu, kwaye ulungelelanise i-voltage. iqhosha lombane wokuphuma ukwenza amandla ombane afikelele kumbane osebenzayo ofunekayo. (Ukuvala: Isalathisi soxinzelelo oluphezulu sibuyela ku-zero, kwaye umva ubuyela ukuvala ngokulandelelana. Inkqubo yonikezelo lwamanzi ilibaziseka imizuzu engama-30 ukuvala)

3. Faka inzwa yokufudumeza ngaphandle kokudibanisa nombane. Ukudibanisa phakathi kwendandatho yokunciphisa uxinzelelo kunye nenzwa kufuneka ibe noqhagamshelwano oluhle. Ukuba kukho i-oxide, sebenzisa ilaphu le-emery okanye ezinye iindlela zokuyisusa. Lungisa i-gap kunye nobude phakathi kwe-sensor kunye ne-workpiece, kwaye uyigcine ihambelana ne-side plate. (oko kukuthi, lungelelanisa indawo kwi X, Y, Z izalathiso, kwaye urekhode idatha)

4. Isixhobo sokupholisa sezixhobo zokucima isantya esiphezulu sidla ngokuba ngamanzi kunye noxinzelelo oluthile lolwelo olucimayo, kwaye iqondo lobushushu lendawo yokucima lingaphantsi okanye lilingana ne-50 °C; kwezinye ii-workpieces ezingenako ukuhlangabezana neemfuno, kuvunyelwe ukulungelelanisa ukugxininiswa kolwelo lokucima ngokufanelekileyo, kodwa kufuneka kuqinisekiswe ukuba ubulukhuni bufanelekile kwaye akukho ngqungquthela yokucima.

5. Ngaphambi kokuveliswa, i-nozzle yokucima i-nozzle kufuneka iphele, kwaye akukho foam emhlophe ecacileyo kumanzi okucima.

6. Ubunzulu obusebenzayo bomaleko obunzima besixhobo sokucima i-high-frequency kuya kuthatyathwa kwaye kulinganiswe ngokweemfuno zokuvavanya kunye nemigangatho efanelekileyo kwikhadi lenkqubo yokushisa ukufudumala ukwenza ukuba ihlangabezane neemfuno zobugcisa.

7. Umqhubi kufuneka alungelelanise iiparitha zenkqubo ngokweemfuno zenkqubo, i-sensor ezahlukeneyo, kunye neendlela ezahlukeneyo zokucima (i-fixed-point okanye eqhubekayo). Iqela ngalinye lamalungu kufuneka licinywe iziqwenga ezi-1-2 ngaphambi kokuveliswa. Emva kokuvavanya, akukho ziqhekeza eziphezulu zokucima i-frequency, kwaye ubunzima kunye nobunzulu bomgangatho obunzima bufanelekile phambi kokuveliswa kobuninzi.

8. Ngethuba lenkqubo yokuvelisa, umqhubi kufuneka aqaphele ukuguquguquka kwe-voltage yesixhobo somatshini, ubushushu, indawo yokufudumala kunye nokutshintsha kwesikhundla esibangelwa yindawo ehambelanayo kunye ne-gap phakathi kwe-workpiece kunye ne-sensor. Ukutshintsha kwamandla okupholisa okubangelwa ukuphambuka kombhobho wokutshiza kufuneka kulungiswe nanini na ukuba kuyimfuneko.

9. Amacandelo acinyiweyo aphezulu kufuneka ahlanjululwe ngexesha, ngokubanzi kwiiyure ze-2 emva kokucima. I-carbon steel, i-alloy steel kunye neemveliso ezinobunzima obuhlukeneyo kunye nomxholo wekhabhoni ≥ 0.50%, kufuneka zihlanjululwe kwiiyure ze-1.5.

10. Izinto zokusebenza ezifuna ukusetyenzwa kwakhona kufuneka zifakwe kwisiqhelo ngaphambi kokuba ziphinde zisebenze ukuthintela iintanda ezibangelwa ukucima kwakhona. Izinto zokusebenza zivumelekile ukuba ziphinde zisetyenzwe kube kanye kuphela.

11. Ngethuba lenkqubo yokuvelisa, umqhubi kufuneka aqhube iimvavanyo ezingaphantsi kwezintathu zobunzima (ngaphambi, ngexesha, kwaye ekupheleni komsebenzi).

12. Xa kusenzeka imeko engaqhelekanga ngexesha lotyando, amandla okusebenza kufuneka acinywe ngoko nangoko, aze umphathi weendibano zocweyo axelelwe kumphathi wendawo yokusebenzela ukulungiselela uhlengahlengiso okanye ukulungiswa.

13. Indawo yokusebenza kufuneka igcinwe icocekile, yomile kwaye ingenamanzi, kwaye kufuneka kubekho irabha eyomileyo ekhuselayo kwi-pedal yokusebenza ukuqinisekisa ukhuseleko lomsebenzisi.